AUN 210

Standard size (8.2ft / 2.5m) ramp, suitable for long-bed Pickups and longer Vans.

The AUN 210 is the standard Neo-Dyne powered motorcycle ramp for full-size pickup trucks and the most popular model for full-size vans. It is made for a loading height of around 90 cm (35") and a cargo bed plus lowered tailgate of around 2.5 m (8.2 ft). It works on most standard trucks without any modifications, so a heavy motorcycle goes into the bed safely, by one person and without pushing it up a steep ramp.

For the best fit we advise cutting the base ramp to the length of your cargo bed with the tailgate down. The tilt ramp stays at its full length, which keeps the loading angle gentle. That matters with heavy bikes and with long exhaust pipes that could otherwise scrape the ground.

Load a heavy motorcycle on your own

Pushing a heavy bike up a steep aluminium ramp is how motorcycles get dropped and backs get hurt. With a Neo-Dyne ramp you never push the bike uphill. You roll the front wheel into the wheel chock while the ramp is tilted down to the ground, strap the bike in, and let the ramp do the lifting:

  • A standard 18V cordless drill with 120 Nm of torque in the lowest gear drives a self-locking, fin-cooled worm drive that pulls the motorcycle up.
  • The ramp tilts to horizontal while it is still outside the vehicle, so the bike is level before it rolls in. This is Neo-Dyne's PowerTilt feature.
  • The worm drive is self-locking: when you stop, the load stays exactly where it is.

The ramp lifts motorcycles of up to 550 kg (1200 lbs), which covers touring bikes, baggers and heavy cruisers. There is no wiring and no battery to install in your vehicle, so the ramp never drains your vehicle battery. If your drill battery runs flat, you can still operate the ramp with a ratchet or crank, only more slowly. Do not use an impact driver, as it will damage the worm drive.

Drive with the tailgate closed

On a long-bed truck, combine the AUN 210 with the AC-004 tailgate adapter. It clips onto the main frame without tools and lets the tilt ramp slide over the tailgate, so you can close the tailgate after the motorcycle is loaded and drive with the tailgate shut.

Pickups, vans and more

The AUN 210 is not limited to pickups. In full-size vans it gives longer touring bikes the extra runway they need while keeping the loading angle smooth, and the ramp tilts to horizontal while still outside the vehicle, so it works in tight spaces. For long bikes such as a Honda Gold Wing or a chopper, the AC-003 extender lets you slide the bike further into the van so you can close the rear doors. The AC-008 cargo platform, which is only compatible with the AUN 210, turns the ramp into a ground-loading cargo loader and slide-out for loads up to 350 kg / 770 lbs.

Specifications

  • Payload: up to 1200 lbs / 550 kg
  • Total length: 8.2 ft / 2500 mm
  • Loading height: up to 35" / 900 mm, or 51" / 1300 mm with the AC-001 extender
  • Maximum wheelbase: 79" / 2000 mm
  • Rear tires up to 300 mm wide
  • Ramp weight: 200 lbs / 95 kg

Built for daily, professional use

The beams are custom-designed profiles in 6061-T6 aerospace-grade aluminium, as strong as mild steel at a third of the weight. All steel parts are laser cut, welded, zinc plated and then powder coated for corrosion resistance. The computer-designed wheel chock adjusts quickly to different tire widths and diameters and takes rear tires up to 300 mm wide. The tie-down T-bar secures the motorcycle without putting extra load on the front forks.

Professional haulers rely on it every day. Ray Jackson of South of 80 Ray's Chopper Shop loads Harley-Davidson baggers six times a day on average: "The Neo-Dyne Loaders handles the 900 lb bikes with ease!"

Installation without drilling

You can bolt the ramp to strongpoints in your vehicle (the ramp joiners can be moved to line up with them), but you don't have to drill at all. With the AC-012 boltless attachment kit and standard ratchet straps hooked to the tie-downs of your cargo bed, you can install or remove the ramp in a matter of minutes. In most countries a strapped-down ramp counts as payload rather than as a modification to the vehicle, and you can easily move it from one vehicle to another.

Frequently asked questions

Does the AUN 210 fit my pickup truck?

It fits most standard pickups with a loading height of around 90 cm and a cargo bed plus lowered tailgate of around 2.5 m. For short beds, look at the AUN 150 or the folding AUN 250. For an exact recommendation, use the Configure yours tool.

My truck is higher than 90 cm. Can I still use it?

Yes. The AC-001 extender clips onto the tilt frame and raises the loading height to 51" / 1300 mm, or even higher with a longer custom extender. It is popular for lifted 4x4s and adventure trucks.

Do I need to install a battery or wiring?

No. The ramp is operated with a standard 18V cordless drill, so there is no wiring, no extra battery and no hydraulic pump to install in your vehicle.

Can I close the tailgate with the motorcycle loaded?

On long-bed trucks, yes: with the AC-004 tailgate adapter the tilt ramp slides over the tailgate so you can close it after loading.

Where can I buy the AUN 210?

Neo-Dyne ramps are sold through authorized dealers worldwide. Find the dealer for your region on our dealers page, or request a quote and we will put you in touch.

AUN 210

Neo-Dyne AUN 210 powered motorcycle ramp
USD
3350
EUR
2395
excluding sales tax and freight
EUR
including VAT, excluding freight
Where to buy
No items found.

No items found.

Tech Specs

Total Length                                                                  
8.2 ft / 2500 mm
Weight
200 lbs / 95 kg
Max Load Height *
35" / 900 mm
Max load height with extender *
51" / 1300 mm
max payload
1200 lbs / 550 kg
max wheelbase
79" / 2000 mm

* with a longer AC001 extender, it is possible to increase the loading height to 59" / 1500 mm

Download manual & specs

Accessories

See all >
configure yours

Upcoming Events

No events yet.